CROWN INDUSTRIAL PRODUCTS CO -- COLD GALVANIZING COMPOUND, #7007  -- 6850-01-053-9224
<pre>=====================  Product Identification  =====================

Product ID:COLD GALVANIZING COMPOUND, #7007
MSDS Date:01/17/1986
FSC:6850
NIIN:01-053-9224
=== Responsible Party ===
Company Name:CROWN INDUSTRIAL PRODUCTS CO
Address:HWY 47 N
Box:350
City:HEBRON
State:IL
ZIP:60034
Country:US
Info Phone Num:800-766-7655/FAX 815-648-4090
Emergency Phone Num:800-766-7655/815-648-2424
Preparer's Name:ROBERT E. BAYTON,LAB SUPV
CAGE:92381
=== Contractor Identification ===
Company Name:CROWN INDUSTRIAL PRODUCTS CO
Address:HWY 47 N
Box:350
City:HEBRON
State:IL
ZIP:60034
Country:US
Phone:815-648-2424
CAGE:92381

=============  Composition/Information on Ingredients  =============

Ingred Name:ZINC  (SARA III)
CAS:7440-66-6
RTECS #:ZG8600000
Fraction by Wt: 51-70%
OSHA PEL:10 MG ZNO/M3
ACGIH TLV:10 MG ZNO/M3; 9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:TOLUENE  (SARA III)
CAS:108-88-3
RTECS #:XS5250000
Fraction by Wt: 11-30%
OSHA PEL:200 PPM/150 STEL
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:XYLENES (O-,M-,P- ISOMERS)	(SARA III)
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: 1-10%
OSHA PEL:100 PPM/150 STEL
ACGIH TLV:100 PPM/150STEL;9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:LIQUIFIED PETROLEUM GAS,SWEETENED
CAS:68476-86-8
Fraction by Wt: 11-30%
ACGIH TLV:1000 PPM

=====================  Hazards Identification  =====================

Effects of Overexposure:INH:CAUSE DIZZINESS,NAUSEA AT HIGH
    CONG;EYE/SKIN IRRITANT;ING.IS NOT LIKELY TO HAPPEN.

=======================  First Aid Measures  =======================

First Aid:USE STANDARD FIRST AIR PROCEDURES. CALL EMERGENCY MEDICAL
    CARE.

=====================  Fire Fighting Measures  =====================

Flash Point:AEROSOL
Extinguishing Media:CO*2, FOAM, DRY CHEM.
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:TREAT AS CYLINDERS OF COMPRESSED GAS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:VENTIALTE AREA.REMOVE ALL SOURCES OF
    IGNITION.CLEAN UP WITH INERT MATERIAL AND DISPOSE OF IN ACCORDANCE
    WITH ALL LOCAL,STATE AND FEDERAL REGULATIONS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE IN DIRECT SUNLIGHT,NEAR
    OPEN FLAMES OR AT TEMP ABOVE 120F.
Other Precautions:INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING
    VAPORS & INHALING CONTENTS CAN BE HARMFUL OR FATAL. VAPOR PRESSURE
    IS MEASURED AT 70F.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IN ACCORDANCE WITH 29CFR 1910.134.
Ventilation:LOCAL EXHAUST.
Protective Gloves:RUBBER/NEOPRENE
Eye Protection:SAFETY GLASSES
Other Protective Equipment:WEAR FULL PROTECTIVE CLOTHING.
Supplemental Safety and Health
MSDS DATED 1-17-86.

==================  Physical/Chemical Properties  ==================

HCC:V3
Vapor Pres:>50
Vapor Density:>1
Spec Gravity:>2
Evaporation Rate &amp; Reference:<1,ETHER=1
Solubility in Water:NEG
Appearance and Odor:BRAY,AROMATIC ODOR.
Percent Volatiles by Volume:53

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.ACIDS OR BASES; & WATER.
Stability Condition to Avoid:OPEN FLAMES,SPARKS.ELECTRICAL ARCS.
Hazardous Decomposition Products:CO,CO*2.
Conditions to Avoid Polymerization:STRONG OXIDIZING AGENTS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DO NOT PUNCTURE OR INCERATE. EMPTY CONTAINERS
    MAY BE DISPOSED OF THROUGH NORMAL CHANNELS.FULL OR PARTIALLY FILLED
    CONTAINERS ARE CONSIDERED HAZARDOUS WASTE.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.